TCS 3512-01 User Manual

1 Copyright 2016 Thermoplastic Comfort Systems, Inc.
Operating Instructions: TCS Digital Furnace
www.tcsdentalinc.com / 866-426-2970
I092514 Rev B
Eective Date: 11/01/16
TCS Digital Furnace
The TCS Digital Furnace is designed to
be simple and easy to use. This digital
furnace is used to melt thermoplastic
dental material and then be immediately
transferred to an injection unit. The
melting cylinder, knock out kit, and bronze
plugs are used in conjunction with the
furnace.
Item #3512-01 (110V)
Item #3512-02 (220V)
operating instructions
tcs® Digital Furnace
WATLOW
FUSE
POWER
Digital Furnace
EZ-ZONE
I
o
A
B
C
D
WATLOW
FUSE
POWER
Digital Furnace
R
SD31
1
SET
2
%
E
F
SPECIFICATIONS
Yield: Approx. 30 cases per day
Weight: 5 lbs | 2.3 kilos
Dimensions: Width 5” | Height 7.5” | Depth 5.5”
Available voltage: 110V & 220V
BACK VIEW
E. Serial number
F. Power connection
FRONT VIEW
A. Melting chamber
B. Fuse
C. On/o button
D. Temperature
control
A
B
C
D
E
F
G
ITEMS NEEDED
A. Injection flask (Item #3701-01)
B. Knock-out stand (Item #3705-01)
C. Knock-out rod (Item #3707-01)
D. Thick bronze plug (Item #3712-01)
E. Thin bronze plug (Item #3709-01)
F. Melting cylinder (Item #3703-01)
G. Mold release spray (Item #3814-01)
TCS Digital Furnace
Operating Instructions
plEasE REad maNual pRIOR TO usE
WATLOW
FUSE
POWER
Digital Furnace
EZ-ZONE
I
o
A
B
C
D
1. Get to Know Your Machine

TCS 3512-01 Specifications

General

Brand	TCS
Model	3512-01
Category	Furnace
Language	English

Summary

Get to Know Your Machine

Front and Back Views

Overview of machine components including front and back views.

Required Items and Specifications

Lists necessary accessories and technical specifications for the furnace.

Unpacking and Safety

Safety Warnings and Precautions

Important safety information, hazards, and required symbols for safe operation.

Ventilation Clearance Requirements

Specifies minimum clearance distances around the unit for safe operation.

Getting Started

Initial Setup and Connection

Steps for initial setup, including power connection and voltage matching.

Operating the Furnace

Furnace Operation Procedure

Detailed steps for operating the furnace, including melting resin and injection.

Adjusting Furnace Temperature

Instructions on how to adjust and stabilize the furnace temperature.

Maintenance

Cleaning and Maintenance

Guidelines for cleaning the furnace chamber and melting cylinder.