Text Entry
The UWT-100 has a text entry interface that is used to ll out text-based
elds such as WiFi passwords. Whenever the throttle requires text input,
it will display the text entry interface. A sample is shown (G).
Within the text entry interface, the thumbwheel adjusts the position of
the highlighted character. Rotate the thumbwheel to move the cursor to
the rst character you want to enter, then use the button to ‘Add’ that
character. If you make a mistake, you can delete a character using the
Backspace button. You may navigate through your entered text us-
ing the single up and down chevron buttons.
The double up and down chevron buttons move the cursor up or
down one whole line at a time. These buttons also advance the cursor
to other pages of characters. To quickly switch between uppercase and
lowercase letters, use the Shift key.
A fully-entered password is shown above (H). Letters and special char-
acters can all be entered with the text entry interface. Numbers do not
display within the text entry screen and can be entered directly with the
throttle keypad
When you have nished entering text, press Save or Enter .
G. H.
9
To Next Page
Loading...
Need help?
General