Teac 3 - Page 4

Equa1 ization
Crosstal k
Distortion, overall
(Mic input to output)
Fader attenuation
Send and receive data
Accessory send level
Accessory recei ve
l evel
Bus input, sub-mix buss input
Input impedance
Nomi nal
l evel
Monitor input
Input impedance
Nominal level
Sub-mix input
Input impedance
Nominal level
Cue output
Load impedance
Nominal level
Direct output
Load impedance
Nominal level
Power requirements
Peak and dip type,
il5dB continuously variable
Hi-band
- 3KHz % lOKHz, switchable
lo-band
- 75Hz % 200Hz, switchable
Greater than 60dB (at
1KHz)
0.3% THD maximum
Greater than 60dB
Nominal
-10dB (0.3V) into 10K ohms or higher
Nominal
-10dB (0.3V) into 10K ohms or higher
Greater than
10K ohms
-2dB
(0.78V)
Greater than 10K ohms
-2dB
(0.78V)
Greater than 10K ohms
-10dB (0.3V)
Greater than 10K ohms
-10dB (0.3V)
Greater than 10K ohms
-10dB (0.3V)
117V (200V, 220V%240V, 250V) AC, 50/60Hz, 40W