Do you have a question about the Teac X-3 and is the answer not in the manual?
Lists technical details of the tape deck's physical and functional attributes.
Provides performance metrics and mechanical/electrical specifications for service.
Procedure to check and adjust the capstan shaft thrust clearance.
Procedure to check and adjust the shut-off switch position.
Instructions for adjusting the brake mechanism components and clearances.
Procedure to measure and check take-up torque.
Diagram showing head alignment parameters (azimuth, height, tilt).
Criteria for adjusting tilt, azimuth, and tangency of heads.
Step-by-step guide for aligning heads.
Procedure to check the +12V DC output of the power supply.
Checks for monitor output level and VU meter performance.
Detailed exploded view of the tape deck assembly.
Detailed exploded view of internal components.
Detailed exploded view of internal components.
Lists components and schematic for Control PCB A.
Lists components and schematic for Control PCB B.