To Next PageTo Next Page
Need help?Do you have a question about the Teac X-1000R and is the answer not in the manual?
Lists technical specifications for the tape deck, including heads, reel size, speeds, inputs/outputs, power, and weight.
Provides mechanical performance data such as tape speed deviation, wow/flutter, pinch roller pressure, and brake torque.
Details electrical performance metrics like frequency response, signal-to-noise ratio, and channel separation.
Adjusts tape tension for forward play mode using R120.
Adjusts tape tension for reverse play mode using R220.
Adjusts tape tension for fast forward mode using R237.
Adjusts tape tension for rewind mode using R238.
General guide for aligning heads and tape path components.
Adjusts HIGH SPEED control for 3000Hz ±5Hz at high tape speed.
Adjusts LOW SPEED control for 3000Hz ±5Hz at low tape speed.
Measures playback wow and flutter at high and low speeds.
Checks monitor levels and output levels for line and microphone inputs.
Aligns playback head azimuth using an oscilloscope for optimal phase relationship.
Checks frequency response across various speeds and tape types.
Measures the signal-to-noise ratio for playback.
Adjusts record head azimuth for optimal phase relationship.
Sets record bias for EE and LHII tape types.
Measures signal-to-noise ratio for LHII and EE tape types.
Checks recording frequency response for EE and LHII tape types.
Checks encoder input and output levels.
Checks decoder input and output levels.
Checks frequency response with DBX engaged.
Measures signal-to-noise ratio with DBX engaged.
Checks distortion levels with DBX engaged.
Detailed steps for adjusting the DBX encoder PCB, including input, RMS, and VCA settings.
Detailed steps for adjusting the DBX decoder PCB, including input, RMS, and VCA settings.
Identifies adjustment potentiometers and test points on the REC AND PLAY AMP PCB.
Identifies adjustment potentiometers and test points on the DBX PCB.
Schematic diagram and component layout for the REC AND PLAY AMPL PCB.
Schematic diagram and component layout for the CONTROL PCB.
Schematic diagram and component layout for the POWER/SERVO PCB.
Schematic diagram and component layout for the DBX PCB.
List of components (ICs, Transistors, Diodes, Resistors, Capacitors) for REC/PLAY AMPL PCB.
List of components for the POWER/SERVO PCB ASSY.
List of components (ICs, Transistors, Carbon Resistors) for DBX PCB ASSY.
Lists technical specifications for the tape deck, including heads, reel size, speeds, inputs/outputs, power, and weight.
Provides mechanical performance data such as tape speed deviation, wow/flutter, pinch roller pressure, and brake torque.
Details electrical performance metrics like frequency response, signal-to-noise ratio, and channel separation.
Adjusts tape tension for forward play mode using R120.
Adjusts tape tension for reverse play mode using R220.
Adjusts tape tension for fast forward mode using R237.
Adjusts tape tension for rewind mode using R238.
General guide for aligning heads and tape path components.
Adjusts HIGH SPEED control for 3000Hz ±5Hz at high tape speed.
Adjusts LOW SPEED control for 3000Hz ±5Hz at low tape speed.
Measures playback wow and flutter at high and low speeds.
Checks monitor levels and output levels for line and microphone inputs.
Aligns playback head azimuth using an oscilloscope for optimal phase relationship.
Checks frequency response across various speeds and tape types.
Measures the signal-to-noise ratio for playback.
Adjusts record head azimuth for optimal phase relationship.
Sets record bias for EE and LHII tape types.
Measures signal-to-noise ratio for LHII and EE tape types.
Checks recording frequency response for EE and LHII tape types.
Checks encoder input and output levels.
Checks decoder input and output levels.
Checks frequency response with DBX engaged.
Measures signal-to-noise ratio with DBX engaged.
Checks distortion levels with DBX engaged.
Detailed steps for adjusting the DBX encoder PCB, including input, RMS, and VCA settings.
Detailed steps for adjusting the DBX decoder PCB, including input, RMS, and VCA settings.
Identifies adjustment potentiometers and test points on the REC AND PLAY AMP PCB.
Identifies adjustment potentiometers and test points on the DBX PCB.
Schematic diagram and component layout for the REC AND PLAY AMPL PCB.
Schematic diagram and component layout for the CONTROL PCB.
Schematic diagram and component layout for the POWER/SERVO PCB.
Schematic diagram and component layout for the DBX PCB.
List of components (ICs, Transistors, Diodes, Resistors, Capacitors) for REC/PLAY AMPL PCB.
List of components for the POWER/SERVO PCB ASSY.
List of components (ICs, Transistors, Carbon Resistors) for DBX PCB ASSY.
General| Track System | 4-track, 2-channel stereo |
|---|---|
| Total Harmonic Distortion | 0.8% |
| Motor | 2 x reel, 1 x capstan |
| Reel Size | 7 inch reel |
| Tape Speed | 3.75 & 7.5 ips (inches per second) |
| Wow and Flutter | 0.03% (7 1/2 ips) |
| Signal to Noise Ratio | 58dB |
| Input | Line level |
| Output | Line level |
