Need help?Do you have a question about the Teac X-10 and is the answer not in the manual?
General| Track System | 4-track, 2-channel stereo |
|---|---|
| Reel Size | Up to 10.5 inch reel |
| Total Harmonic Distortion | 0.8% |
| Output | 0.45V (line) |
| Type | Reel-to-reel tape deck |
| Motor | 2 x reel drive, 1 x capstan |
| Tape Speeds | 3.75 & 7.5 ips |
| Heads | 3 x record/playback, 1 x erase |
| Frequency Response | 30Hz to 28kHz (7 1/2 ips) |
| Input | Line level |
Detailed technical specifications for the tape deck.
Technical data for service and maintenance procedures.
Specifications related to mechanical operation and performance.
Specifications related to electrical performance and features.
Procedure for checking the control PCB assembly for proper function.
Steps to adjust the brake system for proper operation and clearance.
Method for measuring brake torque specifications to ensure correct tension.
Procedure for measuring and verifying reel motor torque specifications.
Adjusting the pinch roller pressure stroke for optimal tape contact.
How to measure pinch roller pressure to meet specifications.
Adjusting the height of the tape tension arms for correct tape tension.
Adjusting the tension arm force by changing spring hook position.
Adjusting the position of the stop sensor assembly for accurate detection.
Adjusting the tape speed for accuracy using a frequency counter.
Checking the audio monitoring output levels and performance with test signals.
Measuring wow and flutter for tape speed stability using test tapes.
Instructions for converting voltage settings for general export models.
Diagram showing head arrangement and adjustment points for tape path alignment.
Step-by-step procedure for aligning heads and tape path for optimal performance.
Adjusting playback head azimuth for optimal signal quality.
Checking and adjusting playback output levels to specified values.
Measuring the frequency response of the playback system.
Measuring the signal-to-noise ratio during playback for audio quality.
Adjusting record head azimuth for optimal recording quality.
Setting and checking record levels for proper input signal strength.
Measuring distortion levels during recording to ensure audio fidelity.
Measuring signal-to-noise ratio during recording for audio clarity.
Checking phase shift during recording for channel alignment.
Measuring crosstalk between adjacent tracks for signal isolation.
Exploded view of the X-10R tape deck mechanism with numbered parts.
Detailed list of parts for the X-10R model, including part numbers.
Exploded view of the X-10 tape deck mechanism with numbered parts.
Detailed list of parts for the X-10 model, including part numbers.
Component layout and part list for the X-10R record/play amplifier PCB.
Component layout and part list for the X-10 record/play amplifier PCB.
Component layout and part list for the X-10R control PCB.
Component layout and part list for the X-10 control PCB.
Component layout and part list for the microphone amplifier PCB.
Component layout and part list for the volume control PCB.
Component layout and part list for the DBX in/output PCB.
Component layout and part list for the X-10R connector PCB.
Component layout and part list for the speed switch PCB.
Component layout and part list for the X-10 connector PCB.
Component layout and part list for the stop sensor PCB.
List of integrated circuits on the X-10R REC/PLAY PCB.
List of transistors on the X-10R REC/PLAY PCB.
List of diodes on the X-10R REC/PLAY PCB.
List of resistors on the X-10R REC/PLAY PCB.
List of integrated circuits on the X-10 REC/PLAY PCB.
List of transistors on the X-10 REC/PLAY PCB.
List of diodes on the X-10 REC/PLAY PCB.
List of resistors on the X-10 REC/PLAY PCB.
List of variable resistors used in the circuits, with values.
List of trimmer capacitors used in the circuits.
List of coils used in the circuits, with inductance values.
Other components like switches, jacks, and relays used in the circuits.
List of integrated circuits on the X-10R control PCB.
List of transistors on the X-10R control PCB.
List of diodes on the X-10R control PCB.
List of resistors on the X-10R control PCB.
List of integrated circuits on the X-10 control PCB.
List of transistors on the X-10 control PCB.
List of diodes on the X-10 control PCB.
List of resistors on the X-10 control PCB.
Coding for various types of machine screws used in assembly.
Coding for various types of tapping screws used in assembly.
Coding for various types of setscrews used in assembly.
Coding for various types of wood screws used in assembly.
Coding for various types of taptite screws used in assembly.
Coding for various types of washers used in assembly.
Coding for various types of SEMS screws used in assembly.
Coding for hexagon nuts used in assembly.
Schematic diagram for the control PCB.
Schematic diagram for the capstan motor servo PCB.
Schematic diagram for the stop sensor PCB.
Schematic diagram for the speed switch PCB.
Schematic diagram for the microphone amplifier PCB.
Schematic diagram for the record and play amplifier PCB.
Schematic diagram for the in/out PCB.
Schematic diagram for the volume control PCB.
Schematic diagram for the microphone amplifier PCB.
Schematic diagram for the record and play amplifier PCB.
Schematic diagram for the in/out PCB.
Schematic diagram for the volume control PCB.
Schematic diagram for the microphone amplifier PCB.
Schematic diagram for the record and play amplifier PCB.
Schematic diagram for the in/out PCB.
To Next Page
