Teac CD-RW901SL - Page 34

TASCAM MD-CD1 RS-232C Protocol Specification
33 TEAC Corporation
MECHA STATUS RETURN
This is the return command for the command "MECHA STATUS SENSE [50]."
It returns the current operating status of the mechanism.
Command D0
Machine ID 0
Data 2 bytes
Data 1 Data 2 Description Remarks
0 0 No Disc No disc is inserted
0 1 Tray Tray is being opened or closed
0 2 Open Tray is open
1 0 Stop Stopped
1 1 Play Playing
1 2 Ready On Play-ready mode
8 0 Monitor Input monitor status (no disc is inserted)
8 1 Record Recording
8 2 Record Ready Record-ready mode
8 3 TOC Writing Writing the TOC / Erasing or Finalizing
Request/Preset MECHA STATUS SENSE [50]
ISRC RETURN
This is the return command for the command "ISRC SENSE [53]."
It returns the ISRC code for the current track number.
Command D3
Machine ID 0
Data 12 bytes
Description Remarks
Data 1 – Data
12
ISRC code
Single-byte alphanumeric characters
(If no ISRC code is stored, returns all zeros.)
Request/Preset ISRC SENSE [53]
TRACK No. RETURN
This is the return command for the command "TRACK No. SENSE [55]."
It returns whether the current track number and EOM are shown.
If Group mode is on, the group number is returned.
Command D5
Machine ID 0
Data 6 bytes
Description Remarks
Data 1
Data 2
EOM Status
00：EOM indication not shown
01：EOM is displayed
Data 3 Tens digit 0000 Stopped, and track is not cued, etc.
Data 4 Ones digit 0001 – 0999 Track number
Data 5 Thousands
digit
1000 Group mode is on, but no group has been created
Data 6 Hundreds
digit
1001 - 1099 Group number
・ The group number is returned with 1000 added.
Request/Preset TRACK No. SENSE [55]