TASCAM MD-CD1 RS-232C Protocol Specification
38 TEAC Corporation
POWER ON STATUS
This command indicates that the controlled device has been powered-on.
Command F4
Machine ID 0
Data none
Request/Preset none
CHANGED STATUS
This command indicates that the operation or mode of the controlled device has changed.
Command F6
Machine ID 0
Data 2 bytes
Data 1 Data 2 Description Remarks
0 0 Changed Mechanical
Status
The status of the mechanism has changed
0 3 Changed Track/EOM
Status
The track number has changed. The EOM
display/non-display state has changed.
Request/Preset none
To Next Page
Loading...
