Troubleshooting
Before consulting service personnel, check the following chart for
possible solutions.
PROBLEM SOLUTION
TV will not turn on
ƔMake sure the power cord is plugged in.
ƔThe batteries in the remote control may be
Exhausted; replace the batteries.
No picture, no sound
ƔCheck the cable between TV and antenna/
external AV
device.
ƔPress the power button on the remote.
ƔPress the SOURCE button the remote, then press the
“Ÿ/ź”button repeatedly to select the TV source.
Poor picture, sound OK
ƔCheck the cable between TV and antenna/
external AV
device.
ƔTry another channel, the station may have broadcast
difficulties.
ƔAdjust the brightness/contrast in the Video menu.
Check
that the unit is set to PAL
Audio noise ƔMove any infrared equipment away from the TV.
The TFT LED panel uses a panel consisting of sub pixels which requires sophisticated technology to
produce. However, there may be
a small number of
bright or dark pixels on the screen. These pixels
will have no impact on the performance of the product.
33
To Next Page
Loading...
