S
USB RECORDING From Turntable
etting up (AUX IN) connection
AUX-IN jack will allow you to connect external music player or external sound source to the
main unit.
1
1. Insert the USB stick into the USB port.
2. Press “Source” button to PHONO mode.
3.
Place the record on the turntable and move the TONE ARM to your desired song to
start playing.
4.
Press the “RECORD” button , “REC” will be shown on the display and start recording.
5. Press “RECORD” button to stop recording.
. Plug into a 3.5mm audio cable (not included) into your external music player and
connect the other end (3.5mm jack) into the AUX IN jack on the front of the unit.
2. Make sure your external music player is turned on.
3. Press and toggle the SOURCE button to switch to AUX mode on the unit.
4. Start music playb
ack on your external music player.
5. Adjust VOLUME control to control the sound level of music playback from the speakers
on the unit.
1. You can run the audio from the unit into your home stereo, television or other stereo
source by using the AUX output.
2. To make this connection, you need a standard RCA cable (not included). Plug the red
and white connectors on one end of the cable into the red and white AUX OUT jack on
the rear of the
unit. The other end of the cable will plug into the AUX INPUT jacks of
your selected component.
3. Operate the unit as usual, you can hear the sound produced by the unit.
NOTE: You can still listen to your unit when using the Audio Output feature.
AUX IN Operation
AUX OUT Operation
9
ADAPTER for 45 RPM (Accessory)
This adaptor allows you to play 45 RPM records.
1. Place the 45 RPM ADAPTER over the spindle.
2. Gently place your 45 RPM record onto the turntable.
3. Follow the steps under turntable operation to play you record.
To Next Page
Loading...
