EasyManuals Logo

Teac LX Series User Manual

Teac LX Series
148 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #22 background imageLoading...
Page #22 background image
Recording Times
1-12
Recording Times
z Recording to Memory, 8 channels, 64 MB standard memory (when not recording voice memos
z Recording to MO, 8 channels (when not recording voice memos
* This recording time at a 48 kHz sampling frequency is the value when using an MO disk on which nothing is
recorded after formatting.
z Recording to PC card, 8 channels, 1 GB PC card is used (when not recording voice memos
* This recording time at a 48 kHz sampling frequency is the value when using an MO disk on which nothing is
recorded after formatting.
z Media recording time can be calculated as follows (result by approximately times.):
Recording Time (seconds) = (Media Capacity (Bytes) x 0.9) / [(Number of Analog Input Channels + Number of
Tachometer Input Channels) x Sampling Frequency (Hz) x 2 + 8000]
Media Capacity x 0.9: Considering recording overhead of the media and an additional capacity needed for the
header files, multiply 0.9 (90%) for the used capacity for data files.
Refer the tables later for a combination of the Sampling Frequency vs. the number of analog input channels can be
selected in each recording mode.
Number of tachometer input channels: use "2" in 16 bits mode, "2" for 32 bits/1 channel mode, or "4" for 32 bits/2
channels mode. Use "0" instead of 8000 when the memo voice recording turns to OFF.
Sampling frequencyValue in brackets is the recording
bandwidth with tolerances of +/-0.5 dB)
Recording time
96 kHz 40 kHz 40 s
48 kHz 20 kHz 80 s
24 kHz 10 kHz 160 s
12 kHz 5 kHz 320 s
6 kHz 2.5 kHz 640 s approx. 10 min
3 kHz 1.25 kHz 1,280 s approx. 21 min
1.5 kHz 625 Hz 2,560 s approx. 42 min
Sampling frequencyValue in brackets is the recording
bandwidth with tolerances of +/-0.5 dB)
Recording time
48 kHz 20 kHz 1,600 s approx. 26 min *
24 kHz 10 kHz 3,200 s approx. 53 min
12 kHz 5 kHz 6,400 s approx. 106 min
6 kHz 2.5 kHz 12,800 s approx 213 min
3 kHz 1.25 kHz 25,600 s approx. 7 h
1.5 kHz 625 Hz 51,200 s approx. 14 h
Sampling frequencyValue in brackets is the recording
bandwidth with tolerances of +/-0.5 dB)
Recording time
48 kHz 20 kHz 1,230 s approx. 20 min *
24 kHz 10 kHz 2,470 s approx. 41 min
12 kHz 5 kHz 4,940 s approx. 82 min
6 kHz 2.5 kHz 9,890 s approx. 164 min
3 kHz 1.25 kHz 19,790 s approx. 329 m
1.5 kHz 625 Hz 39,360 sec approx. 11 h

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Teac LX Series and is the answer not in the manual?

Teac LX Series Specifications

General IconGeneral
BrandTeac
ModelLX Series
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals