EasyManua.ls Logo

Teac MC-DV250 - Specifications; DVD Player; Active Subwoofer

Teac MC-DV250
30 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MC-DV250
2
1 SPECIFICATIONS
Pickup :
Signal System :
NTSC / PAL
Semiconductor laser, wave length 650/790 nm
Video signal horizontal resolution :
More than 50 dB (DVD)
DVD Player
More than 480 lines (DVD)
Dynamic range :
Audio frequency response :
Audio signal-to-noise ratio :
62 dB
80 dB
20 Hz ~ 20 kHz (+1/-3dB)
Video signal-to-noise-ratio :
S-Video output
Y (luminance) - Output level :
1 Vp-p (75 ohm)
C (color) - Output level :
286 mVp-p (75 ohm)
Jack :
S-VIDEO jack
Video output
Output level :
1 Vp-p (75 ohm)
Jack :
RCA jack
Component video output (Y, PB, PR)
Y-Output level :
1 Vp-p (75 ohm)
0.7 Vp-p (75 ohm)
PB, PR-output level:
Jacks :
RCA jacks
AV connector
Jack :
SCART
Output Power :
25 W + 25 W
Amplifier
(Stereo, 0.7% THD, 20 Hz TO 20 kHz, 6 ohm)
0.09% (at 25 W, 1kHz, 6 ohm)
Total Harmonic Distortion:
Audio Input sensitivity/impedance:
*LINE: 400mV/47 ohm
Output level/impedance (TAPE REC)
180 mV/ 2.2ohm
Frequency Response :
* LINE 20 Hz to 28kHz, +0 /-3 dB
Signal-to-noise Ratio :
* LINE 80 dB (IHF-A)
Tone control :
BASS: +/- 10dB at 100Hz
TREBLE +/- 10dB at 10 kHz
Tuning Range :
Stereo Separation (1 kHz) :
87.5 ~ 108.0 MHz (50 kHz steps)
Mono: 55 dB
FM Tuner (Without notes 100.1 MHz, 65 dBf)
40 dB
Signal-to-Noise Ratio :
Mono : 0.5%
Total Harmonic Distortion (1 kHz) :
Stereo: 0.8%
Frequency Response :
30 Hz to 15 kHz, +/- 3dB
Stereo: 45 dB
Tuning Range :
522 ~ 1611 kHz (9 kHz steps)
AM Tuner
Usable Sensitivity :
500 uV/m
1.5% at 100 dB/m
Total Harmonic Distortion :
40 dB at 100 dB/m
Signal-to-Noise Ratio :
Speaker Cable x 2
FM T-type Antenna x 1
AM loop Antenna x 1
Owner Manual x 1
Batteries (AAA, R03, UM-4) x 2
Accessories
FM Matching Transformer x 1
Subwoofer cable (RCA) x1
Remote Control Unit x 1 (RC-965)
General (Main unit)
Dimension (W x H x D ):
Weight (net) :
Power requirements :
AC 220V 50 Hz (China model)
Power consumption :
95 W (STAND BY: 1W)
5.4 kg
360 x 102 x 275 mm
AC 230V, 50Hz (Europe/U.K/Hong Kong model)
AC 240V, 50Hz (Australia model)
Active Subwoofer
Unit :
16.5 cm cone type
Impedance :
4 ohm
Output Power:
50 W
200 x 297 x 315 mm
Dimension (W x H x D ):
Weight :
7.0 kg
Input Power :
30 W maximun
Speakers System ( L & R)
Impedance :
110 x 220 x 100 mm
Dimension (W x H x D ):
6 ohm
1 kg
Unit :
2.5 cm / 8 cm cone type
Weight (net) :
Design and specifications are subject to change without notice.
Weight and dimensions are approximate.
LINE means: TAPE PLAY, AUX
*

Other manuals for Teac MC-DV250

Related product manuals