Teac NT-505 - Headphone Usage; Headphone Connection Safety; Speaker Connection

Headphones
For Listening with headphones you have a singular 3.5mm
jack found on the front of the device. If your headphones do
not have a 3.5mm connector, you can purchase a custom
cable or an adapter from moon-audio.com.
Speakers
There are a pair of XLR and a pair RCA pre-amplied outputs found
on the back of the unit that can be used with a speaker amplier or
directly with active speakers.
* Remembertoturnthevolumedownwhenrstsettingupactivespeakers!