Teac SX - Programmed Track Playback Setup; Entering and Confirming Program Mode; Building the Program Sequence; Starting Programmed Playback

23
ENGLISH
22
Up to 64 tracks can be programmed in the
desired order.
Shuffle and Repeat functions don’t work
during programmed playback.
If another source is selected, press
the CD button to select “CD”.
1
Press the PROGRAM button in the
stop mode.
2
The PROGRAM indicator blinks on the
display.
< To cancel the program mode, press the
Stop button (H
).
Press the Skip button (.or/) (or
turn the rotary knob) to select a
track, then press the PROGRAM
button.
4
Programmed Playback 1
CD
MP3
Press the Skip button (.or/) (or
turn the rotary knob) to select a
folder of a MP3 disc, then press the
PROGRAM button.
3
< MP3 tracks recorded out of folders are in
the “01” folder.
<
Skip this step when playing a CD.
program number
track number
track number
folder number
program number
<
When the playback of all the
programmed tracks has finished, or if
one of the following buttons is pressed,
the PROGRAM indicator will go off and
the program mode will be cancelled:
STOP (H
), TUNER, AUX
The program is retained in memory until
the disc cover is opened or the
STANDBY/ON button is pressed. You can
return to the programmed playback by
pressing the PROGRAM button and the
Play/Pause button (G
/J) in the stop
mode. (If another source was selected,
select the CD mode by pressing the CD
button beforehand.)
When the selection of track numbers
is completed, press the Play/Pause
button (G
/J) to start programmed
playback.
5
The track is programmed, and the next
program number (P-02 or P02) is
displayed.
<
Repeat steps and to program more
tracks.
<
You can program up to 64 tracks.
43
MP3
CD MP3