To Next PageTo Next Page
Need help?Do you have a question about the Teac T-H300DABmkIII and is the answer not in the manual?
General| Display | LCD |
|---|---|
| FM Frequency Range | 87.5 - 108 MHz |
| RDS | Yes |
| Type | Tuner |
| DAB/DAB+ Frequency Range | 174.928 - 239.200 MHz |
| Audio Output | RCA |
| Presets | 20 FM, 20 DAB/DAB+ |
| Outputs | Analog, Digital (Coaxial) |
Connects the tuner to an amplifier for system control operations.
Selects system control mode based on connection to A-H300mkIII unit.
Outputs analog 2-channel audio signal to an amplifier or receiver.
Outputs DAB digital audio signal for digital recording or decoding.
Connects the unit to the AC wall socket for power supply.
Connects the provided loop antenna to the AM terminal for reception.
Connects the lead-type FM antenna to the FM 75Ω socket for reception.
Use for weak FM signal areas, connects to the FM 75Ω socket.
Connects the T-type DAB antenna to the DAB socket for reception.
For marginal or poor DAB signal areas, uses dipole or multi-element types.
Turns the unit on or switches it to standby mode.
Knob for tuning and selecting parameters; button to confirm selections.
Selects the tuning band: FM, AM, or DAB.
Changes display information for DAB and selects RDS modes for FM.
Scans for new DAB channels automatically and builds a channel list.
Sets the display order for stations: Favourite, Alphanumeric, Active, and Tidy.
Displays the digital bit error rate of the current tuned channel.
Shows the version number of the installed software for informational purposes.
Allows selection of DAB preset stations stored in memory.
Shows scrolling text label from the radio station, like music titles.
Shows the broadcast category, such as Pop, Rock, or Classical music.
Displays the current date and time provided by the radio station.
Shows the broadcast bitrate and the channel/frequency information.
Alternates between stereo reception for FM and mono for weak signals.
Selects manual tuning, auto tuning, or preset tuning for stations.
Displays the programme service name or station name.
Displays the current time information provided by the station.
Shows the classification of the broadcast, like Pop or Drama.
Displays news or station information up to 64 symbols.
Allows searching for stations based on a selected programme type (PTY).
Addresses problems related to no power, no sound, or noisy audio.
Solves issues with weak signals, station reception, and burbling sounds.
Helps resolve display problems and issues accessing secondary services.
Details tuning range and signal-to-noise ratio for FM reception.
Provides tuning range and signal-to-noise ratio for AM reception.
Lists tuning range, input, sensitivity, and output for DAB reception.
Covers power, dimensions, weight, operating conditions, and included accessories.
