To Next PageTo Next PageWhy is there no sound coming from my Teac T-H500 Tuner?
There are several reasons why you might not be getting any sound from your Teac Tuner. First, make sure that the INPUT SELECTOR on your amplifier is set to "TUNER". If it is not, select "TUNER". Also, check the VOLUME on your amplifier and adjust it accordingly if it's set to "MIN". Finally, ensure that the terminal for the system connection is correctly connected.
What to do if I hear only noise from my Teac T-H500?
If you're only hearing noise from your Teac Tuner, check the antenna connection on the rear panel and connect the antenna if it is pulled out. Also, ensure that the frequency is set correctly.
How to fix noisy broadcasting on my Teac T-H500 Tuner?
If you are receiving a broadcast on your Teac Tuner but it is noisy, try adjusting the antenna's position to find the best reception. Also, if the CD player is on, turn it off.
What to do if the preset call buttons on the remote control do not work on my Teac T-H500?
General| AM Signal-to-Noise Ratio | 50dB |
|---|---|
| AM Harmonic Distortion | 0.3% |
| Output Level | 500 mV |
| Type | Tuner |
| Tuning System | Digital PLL Synthesizer |
| FM Tuning Range | 87.5 to 108 MHz |
| AM Tuning Range | 522 kHz - 1611 kHz |
| FM Sensitivity | 1.2 µV (IHF) |
| FM Signal to Noise Ratio | 70 dB |
| FM Harmonic Distortion | 0.1% |
| Frequency Response | 30 Hz - 15 kHz |
Details on avoiding water, moisture, unstable surfaces, blocking ventilation, and proximity to heat sources.
Guidelines on cleaning, power sources, grounding, cord protection, and internal servicing by qualified personnel.
Warnings about lightning, power lines, overloading outlets, and preventing object/liquid entry.
Specific guidance for UK customers regarding mains plug safety, fuse replacement, and wiring colors.
Detailed description of each button and control on the front panel, including power, tuning, and memory functions.
Technical details for the FM and AM sections, including frequency range, sensitivity, and signal-to-noise ratio.
Solutions for problems like no sound, only noise, or broadcasting received with noise, checking connections and settings.
Troubleshooting steps for when preset call buttons or the remote control do not function correctly.
