Need help?Do you have a question about the Teac TN-280BT and is the answer not in the manual?
General| Type | Belt-drive audio turntable |
|---|---|
| Operation | - |
| Motor type | DC motor |
| Stylus type | mm |
| Product color | Walnut |
| Nominal speeds | 33 1/3, 45 RPM |
| Output voltage | 4.5 mV |
| Turntable size | 30 mm |
| Stylus pressure | 2 g |
| Housing material | MDF |
| Platter material | Aluminum |
| Channel separation | 20 dB |
| Built-in phono preamplifier | Yes |
| Signal-to-Noise Ratio (SNR) | 67 dB |
| Sustainability certificates | RoHS |
| Shape | Straight tonearm |
| Tonearm type | Statically balanced tonearm |
| Tracking angle | 20 ° |
| Bluetooth range | 10 m |
| Line outputs (RCA) | 2 |
| Power supply type | AC |
| AC adapter frequency | 50/60 Hz |
| AC adapter input voltage | 100 - 240 V |
| Power consumption (standby) | 0.5 W |
| Power consumption (typical) | 1.5 W |
| Cables included | RCA |
| Accessories included | Rubber Sheet, EP Adapter, Turntable, Rubber Feet for Dust Cover x2, Hinge x2, AC Adapter |
Weight and Dimensions| Depth | 356 mm |
|---|---|
| Width | 420 mm |
| Height | 117 mm |
| Weight | 4900 g |
To Next Page
