Teac TN-4D-SE - Product Specifications; Platter, Tonearm, and Cartridge Specs; General Unit, Included Items, and Output

ENGLISH
9
Specifications
Included items
Felt mat × 1
45 RPM adapter × 1
Counterweight × 1
Headshell × 1
Sumiko MM type stereo cartridge (Oyster) preinstalled
Platter × 1
Dust cover × 1
Dust cover hinges × 2
RCA audio cable with grounding terminal × 1
AC adapter (GPE036W-240150) × 1
Owner’s manual (this document, including warranty) × 1
o Specifications and appearance are subject to change without
notice.
o Weight and dimensions are approximate.
o Illustrations in this owner’s manual might differ slightly from
production models.
General
AC adapter power
Input......................... AC 100V – AC 240V, 50/60Hz
Output.................................... DC 24V, 1500mA
Power consumption
Standby........................................ 0.5W or less
On (33, 45) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.0W or less
Weight........................................ 6.1kg (131/2lb)
Operating temperature range ...................... 5°C to 35°C
Dimensions (W × H × D) (including protrusions)
When the dust cover is closed
420 × 117 × 356 mm (16 5/8" × 4 5/8" × 14 1/8")
When the dust cover is open
420 × 381 × 402 mm (16 5/8" × 15" × 15 7/8")
When the dust cover is removed
420 × 102 × 356 mm (16 5/8" × 4 1/8" × 14 1/8")
o Performance data is specified at 20°C.
Platter
Drive system .......................................Direct drive
Motor ............................................... DC motor
Rotation speed............................. 331/3rpm, 45rpm
Wow and flutter.................................... 0.1% or less
SN ratio ............... 67dB or higher (A-weighted, 20kHz LPF)
Platter...................................... Aluminum die-cast
30cm (12") diameter
Tonearm
Tonearm type ...............Static-balanced S-shaped tonearm
Effective tonearm length .............................. 223mm
Tracking force variation range ............................ 0–5g
Acceptable cartridge weight .......................... 4.0–13g
14–23g
(with the included headshell)
Cartridge
Type .......................................................MM
Output voltage.................................. 4.0mV (1kHz)
Tracking force .................. 1.5–2.5g (2.3g recommended)
Cartridge weight .......................................... 5.3g
Included headshell weight
10 g (including screws, nuts and wires)
o The need for stylus replacement depends on use conditions,
but we recommend replacement after about 300 hours of
use.
o Replacement stylus model: Sumiko Oyster replacement stylus
Output voltage
PHONO EQ THRU................................ 4.0mV (1kHz)
PHONO EQ ON .............................. 224mV (−13dBV)
Output connectors........................................ RCA