Do you have a question about the Team Blacksheep TBS UNIFY PRO 5G8 HV and is the answer not in the manual?
Enter menu by pressing button for 3s. Red LED flashes once. Select channels by short presses.
Press button for 3s. Red LED flashes twice. Select band by short presses.
Press button for 20-25s. Red LED flashes three times. Unlocks transmitter for all frequencies.
Allows changing channels and power levels without affecting other pilots' signals.
Press button for 3s. Blue LED turns on. Settings saved, exits menu.
Control channel, band, and output power via OSD using SmartAudio, requiring a HAM callsign for high power.
Details the pinout for the V2 model, showing connections for 5V, GND, Audio/Smart Audio, and Video.
Details the pinout for the HV (Race) model, including wiring for DIY builds and TBS CORE products.
Explains the PitMode feature, allowing power-up without interfering with other racers, with different activation methods.
States device compliance with ANSI C63.4 and FCC Part 15, subject to specific conditions.
Details the evaluation of FCC RF exposure requirements for operation with specific distances.
| Video Format | NTSC / PAL |
|---|---|
| Connector | MMCX |
| BEC | 5V / 1A |
| Input Voltage | 7V - 25V (2-6S LiPo) |
| Power Levels | 25mW / 200mW / 500mW / 800mW+ |
Loading...