Team Losi JRX-2 User Manual

•
•
•
•
•
•
•
•
'
•
•
•
•
•
•
•
•
•
•
•
•
•
OWNER 'S GUIDE
•
•
•
•
Carefully read through all instructions
thoroUJ}hly to familiarize yourself with
the parts and construction techniques
used in this
race car. As you read
through.
also pay close attention to the
overall design of the car. Remember,
being
competitive is a measure of the
patience
you put into the construction of
the race car. Take your time and pay
close attention to the details .
•
•
•
16 55 E. MISSION BLVD ., POMONA, CA 91766 , (7 14 ) 620·0164
•
scan courtesy of Vintagelosi. co m
•
•
• •
•
•
•
•
•

Team Losi JRX-2 Specifications

General

Drive	2WD
Scale	1/10
Type	Buggy
Motor Type	Brushed
Shock Type	Oil-filled
Body Type	Lexan

Summary

1. Introduction

Important Safety Notes

Crucial safety guidelines for assembly and product use.

2. Chassis Assembly - Bag A

Securing Side Bulkheads

Attaching side bulkheads to the chassis using flathead screws.

Steering Post Installation

Mounting aluminum steering posts to the chassis.

Front Shock Tower Attachment

Connecting the front shock tower to the front bulkhead.

Rear Bulkhead and Shock Tower Assembly

Front Bulkhead & Battery Holder Mounting

3. Gearbox/Differential Assembly - Bag B

Differential Assembly Part 1

Step-by-step instructions for assembling the differential.

Gearbox Assembly Part 2

Instructions for assembling the gearbox halves and components.

Drive Shaft U-Joint Assembly

Gearbox Mounting and Spur Gear Attachment

Securing the gearbox and attaching the spur gear.

4. Rear Suspension Assembly - Bag C

Rear Bulkhead Ball Joint Installation

Hub Carrier Ball Joint Attachment

Shock Mount and Axle Assembly

Linkage and Drive Shaft Connection

Trailing Link Installation

5. Front Suspension Assembly - Bag D

Steering Sector Arm Assembly

A-Arm and Hinge Pin Attachment

Spindle Carrier to A-Arm Connection

Front Axle and Spindle Assembly

Turnbuckle and Steering Linkage

Shock Mount and Ball Stud Attachment

6. Shock Assembly - Bag E

Shock Shaft and Piston Setup

Assembling the shock shaft, piston, and E-clips.

Shock Cartridge and Oil Filling

Installing the shock cartridge and filling with shock oil.

Front Shock Mount Construction

Shock Assembly Finalization

Securing shock components and ensuring smooth operation.

Rear Shock Assembly

Detailed steps for assembling the rear shock absorber.

Front Shock Assembly

Detailed steps for assembling the front shock absorber.

9. Final Assembly - Bag G

Motor and Gear Cover Attachment

8. Wheels and Tires - Bag F

Tire Inspection and Preparation

Front Wheel Assembly

Rear Wheel Assembly

Wheel Installation on Axles

11. Tuning Tips from Gil Losi Jr.

Gearbox and Differential Tuning

Adjusting the differential for optimal acceleration and handling.

Camber and Toe Adjustments

Setting tire angles for improved cornering and stability.

Ride Height Tuning

Adjusting front and rear ride height for steering and traction.

Spring and Shock Fluid Selection

Choosing springs and shock oils for desired performance.

7. Wing, Body, Gear Cover Trimming

Body and Gear Cover Cutting