To Next PageTo Next Page
Need help?Do you have a question about the Team Losi JRX-Pro and is the answer not in the manual?
Essential safety precautions for assembly and product use.
Instructions for attaching and preparing the gear cover.
Guidance on preparing and painting the car's body shell.
Importance and adjustment of the car's gearbox and differential.
Step-by-step guide for adjusting the differential for optimal performance.
Explanation and adjustment of tire angle relative to the track.
Critical handling adjustment for front tire alignment and turning.
Information on Team Losi tires and tread patterns for performance.
Setting the front ride height for chassis balance and handling.
Setting the rear ride height for chassis stability and performance.
Characteristics of front soft and rear firm springs for handling.
Adjusting shock fluid viscosity to control suspension compression.
Adjusting shock mounting points for front steering response.
Adjusting front camber link for steering characteristics.
Adjusting rear shock mounting for stability and jump landing.
Adjusting rear camber link for traction and handling.
Crucial rear suspension adjustments for traction and stability.
Identification and specifications for various screws used in assembly.
Identification and types of washers included in the kit.
Identification and types of nuts used for assembly.
Identification and types of spacers for various components.
Identification of various threaded rods and their applications.
Identification of different bearings and balls for smooth operation.
Identification of various pins used for securing components.
Identification of ball studs used for suspension and linkages.
Identification of E-clips used for securing pins and shafts.
Different weights of shock fluids for suspension tuning.
Optional spring sets for front and rear suspension tuning.
Various tire compounds and tread patterns for different tracks.
Available wheel options for customization and performance.
Optional spur gears for adjusting gear ratios.
Optional thin bearing for specific component use.
General
