Team Losi XXX4 Graphite Plus User Manual

MADE IN THE UNITED STATES OF AMERICA
P/N 800-0208
4710 Gausti Rd., Ontario CA 91761
Phone: (909) 390-9595 / Fax: (909) 390-5356
www.TeamLosi.com / feedback@TeamLosi.com
OWNER'S
MANUAL
Team losi, Division of Horizon Hobby inc.,
Carefully read through all instructions to familiarize yourself with the parts, construction techniques, and
tuning tips outlined in this manual. Being able to grasp the overall design of your new XXX-4 Graphite
Plus Buggy before beginning the construction process will ensure a smooth assembly.
Take your time and pay close attention to detail. Keep this manual for future reference.
10/01/2003
JAC/RWW

Team Losi XXX4 Graphite Plus Specifications

General

Brand	Team Losi
Model	XXX4 Graphite Plus
Category	Motorized Toy Car
Language	English

Summary

Introduction, Safety, and Specifications

Notes, Symbols, and Safety

Explains manual symbols, notes, and critical safety warnings.

Tools, Hardware, and Gearing Details

Lists required tools, hardware identification, and motor/gearing specs.

Differential Assembly (Bag A)

Front Differential Construction

Instructions for assembling the front plastic differential components.

Rear Differential Construction

Instructions for assembling the rear steel differential components.

Chassis and Drivetrain Assembly (Bag B)

Belt Tensioner and Slipper Clutch

Guides belt installation, tensioner arm, and slipper clutch assembly.

Differential and Chassis Cover Installation

Details installing front/rear differentials and bottom chassis cover.

Steering and Servo System (Bag C)

Steering Linkage and Bellcranks

Assembling bellcranks, drag link, and steering posts.

Servo Mounting and Linkage Connection

Instructions for mounting the servo and connecting the saver.

Suspension and Drivetrain Assembly (Bags D & E)

Front Suspension and Drivetrain Components

Installing front arms, pivots, shock tower, CVD axles, spindles.

Rear Suspension and Drivetrain Components

Installing rear arms, hubs, shock towers, CVD axles, and tie rods.

Shock Absorber Assembly and Installation (Bag F)

Shock Assembly and Piston Setup

Steps for assembling shock shafts, pistons, and cartridges.

Shock Filling and Mounting

Procedures for filling shocks with fluid and installing them.

Final Assembly and Body Mounting (Bags G & H)

Tires, Bumpers, Motor, and Body Installation

Mounting tires, installing bumpers, motor, and battery posts.

Body and Wing Installation

Instructions for mounting the main body and rear wing.

Final Checklist and Performance Tuning

Pre-Run Checklist

Essential pre-run checks for differential, suspension, and controls.

Chassis Tuning and Handling Tips

Tips on adjusting suspension, camber, toe, and ride height for performance.

Spare Parts List