16 OWNER’S MANUAL
ADJUSTMENT & MAINTENANCE
General Maintenance
1. As a general rule to ensure longevity and
good performance of your bicycle, have
it regularly serviced by a qualied and
experienced bicycle mechanic.
2. There is no specic maintenance required on
your electrical components. Simply charge
your batteries after each ride to ensure
longest possible life.
3. Adjustment of the height of saddle – Loosen
quick release on seat tube and adjust saddle
to a suitable height. The raised height of the
saddle cannot exceed the height marked
with minimum insertion mark on saddle stem.
4. Brakes and their adjustment are standard to
the bicycle industry. Be sure to keep brakes
properly adjusted always.
5. Regular checking of spoke tension and
wheel alignment can also ensure maximum
performance of your bicycle.
Tyre Pressure
1. It is most important for the continued
effective operation of your bicycle that you
maintain the correct tyre ination.
2. Please conrm the correct pressure on the
side wall of your tyre. This will be between
30psi and 65psi.
To Next Page
Loading...
