30 OWNER’S MANUAL
the seat post up or down as required. Make sure
that the saddle is parallel to the top tube of the
bicycle. Retighten the seat post tight enough so
that you cannot twist the saddle out of alignment.
A loose seat post will allow the saddle to turn or
slip and may cause you to lose control and fall.
Therefore:
WARNING
Do not replace the seat post with a post which is: A) not of
the same diameter or B) longer than the original. Either will
void the warranty and could lead to seat post failure, loss of
rider control and injury.
1. Ask your bicycle retailer to help you make
sure you know how to correctly clamp your
seat post.
2. Before you ride the bicycle, rst check that
the seat post is securely clamped.
Under no circumstances should the seat post
project from the frame beyond its ‘Minimum
Insertion’ or ‘Maximum Extension’ mark.
To Next Page
Loading...
