To Next PageTo Next Page
Need help?Do you have a question about the teca TLC-700 and is the answer not in the manual?
The TECA TLC-700 is a solid-state liquid chiller with an integral TC-3300 temperature control, designed for compact and reliable temperature management in various applications, including laboratory, laser, x-ray, out-patient, and medical therapy. It functions as an electrical heat pump and a solid-state cooling device.
The TLC-700 operates as a recirculating liquid chiller, utilizing a solid-state thermoelectric cooling system to maintain a precise fluid temperature. It is designed to cool an external load by circulating a chilled fluid through external plumbing lines. The unit includes an internal reservoir for the circulating fluid and a pump to drive the fluid through the system. Heat generated by the thermoelectric modules is dissipated by a tubeaxial fan, requiring adequate airflow around the unit. The integral TC-3300 temperature controller allows for precise temperature setpoint adjustment and control, with options for PID or ON/OFF control methods. Safety features include low fluid and low flow indicators to prevent damage to the pump and ensure proper operation.
Model: TLC-700 (Part #6-A0D0-0-000) Heating Option: TLC-700HC (Part #6-A0D0-1-000) Cooling Capacity: 215 Watts (at 25°C ambient to fluid supply, 0°C delta T) Voltage: 120 VAC Current: 4.2 Amps RMS Frequency: 50/60 Hz Weight: 13.6 kg (30 lbs) Maximum Ambient Temperature: 50°C (122°F) Heating Option (HC suffix): 200 Watt Control Stability: < +/- 0.5°C (Digital Display 0.1°C Indication) Housing: Stainless Steel Type 304 Liquid Jacket: Aluminum Type 6063 Reservoir Capacity: 500 ml (0.13 Gal) Pump Flow: 2.5 LPM (0.66 GPM) Open Flow External Plumbing: 6-foot supply & return reinforced 3/8" ID PVC tubing with insulation. Quick connectors are provided. Dimensions: 13.69 x 7.2 x 12.2 inches (H x W x D) Minimum Recommended Clearance: 3 inches from the rear of the unit.
TC-3300 Temperature Controller Specifications: Front Panel Display: 000.0 Digital High Brightness Display Type: P.I.D. (Proportional-Integral-Derivative) Calibration Accuracy: +/- 0.25% of span +/- 1 LSD Control Stability: Application Dependant, Typically < +/- 1°C Ambient Range: 0-50°C (32-130°F) Sensor (Provided): T-Type (6' Length cable) Power Input: AC & DC Models Output: Single Output (Cool Only) or Dual Output (Cool/Heat) Input: AC Input 100-240 VAC or DC Input 12-24 VDC Solid State Relay: Internal Relay(s) or External Relay(s) AC load (10 amp) / DC load (20 amp) Communications: No Communications, RS-232, or RS-485 (Software ordered separately) Approvals (pending): UL873, EN 61010, CSA 22.2 No. 1010.1-92 EMC Emission: EN50081-1 FCC Rules 15 subpart J Class A EMC Immunity: EN50082-2 Sensor Range (T-Type): -200°C to +250°C
General