Inordertouse tune optionwiththecontrollerforcoolonlysetup,thecontrollershouldbesetupwith PIDSTYLECOOLONLY settings.
Followthestepsoutlinedbelowtochangethecontrollersettingsfrom ON/OFFSTYLE to PIDSTYLECOOLONLY .
Method1:
-In LEVEL3changethe rsEt valueto All. rsEt All
-Changethesettingsin LEVEL1through LEVEL4tomatchthesettingsinthe PIDSTYLECOOLONLY setup.
Method2:
-In LEVEL2changethe unit valueto nonE. unit nonE
-In LEVEL3changethe sp1.d valueto rLy2 and sp2.d to rLy1.
sp1.d rLy2
sp2.d rLy1
-Changethesettingsin LEVEL1through LEVEL3tomatchthesettingsoutlinedin PIDSTYLECOOLONLY setup.
To Next Page
Loading...