Need help?Do you have a question about the Teccpo TDRT03P and is the answer not in the manual?
Guidelines for maintaining a safe workspace and using personal protective equipment.
Instructions for proper tool operation, maintenance, and servicing.
Specific safety rules for rotary tool use, including kickback and accessory handling.
Further safety precautions, electrical safety, and environmental considerations.
Detailed technical data for the tool's console.
Technical details for the battery charging unit.
Procedures for installing and removing the power pack.
Step-by-step guide for changing collets and accessories.
Instructions for operating the battery charger and indicators.
Overview of mandrels and collets for accessory attachment.
Information on sanding drums, bands, and cut-off wheels.
Details on grinding wheels, high-speed cutters, and engraving cutters.
Guide to using drill bits and wire brushes.
Steps for installing the cutting guide attachment.
Instructions for fitting the detailer's grip accessory.
Guide for mounting the shield attachment.
Procedures for attaching the flexible driver accessory.
Recommendations for cleaning and maintaining the tool.
Advice on product disposal and environmental responsibility.
Details on the device's compliance with FCC rules.
General| Power/Voltage | 4V |
|---|---|
| Battery Type | Lithium-Ion |
| Battery Capacity | 2000 mAh |
| Charging Time | 1 hour |
| Torque Settings | 6+1 |
| Chuck Size | 1/4 inch |
| LED Lighting | Yes |
| Chuck Type | Quick release |
To Next Page
