14
Search Mode
Allows you to set up manual or automatic network search. Press the [ OK ] button to enter into the “SEARCH MODE” option. Use
the [ ][ ] button to select “AUTO” or “MANUAL” search. Press the [ OK ] button to save the setting.
Preferred Network
Allows you to set up manual or automatic network selection. Press the [ OK ] button to enter into the “PREFERRED NETWORK”
option. Use the [ ][ ] button to select “AUTO” or “MANUAL” search. Press the [ OK ] button to save the setting.
SPEED DIAL
In Standby mode, press the Memory [ M1-M6 ] buttons for speed dialling feature. Please ensure the contact numbers are pre-installed into
the memory for this feature to work. Please refer to the following for setting up “Speed Dialling” function. In the “SETTINGS”
submenu, use the [
][ ] buttons to toggle between the options “TIME AND DATE”, “LANGUAGE”, “DISPLAY SETTING”, “NETWORK
SETTING” and “SPEED DIAL”. Select “SPEED DAIL” and press the [ OK ] button to conrm. Use the [ ][ ] buttons to shift between
the Memory [ M1-M6 ] buttons. Press the [ OK ] button to make your selection. Use the [ ][ ] buttons to shift between “EDIT”, “RE-
MOVE” and “REMOVE ALL”.
Edit
Press the [ OK ] button to enter into the “EDIT” option. Use the alphanumeric keypad to input the contact number. Use the [ C ]
button to delete an incorrect entry. Press the [ OK ] button to save the entry.
Remove
Press the [ OK ] button to enter into the “REMOVE” option. Press the [ OK ] button to conrm to remove the current entry. To exit
from this function, press the [ C ] button.
Remove All
Press the [ OK ] button to enter into the “REMOVE ALL” option. Press the [ OK ] button to conrm to remove all the contacts stored
in M1 to M6. To exit from this function, press the [ C ] button.
To Next Page
Loading...
