14
DAN
NOR
FIN
SWE
ENG
POL
RUS
ENG
Device overview
Description Steps
Operating lock
Blocks the room thermostat.
The actual temperature and
all active functions are still displayed,
the possibility to change the target
temperature and the operation are de-
activated.
Activate
¾ Confirm the selection
by pressing.
9 The operating lock is acti-
vated.
9 The symbol
is displayed.
9 The basic level is displayed.
Deactivate
¾ Press the rotary control
for > 5 seconds.
9 The symbol
is deactivat-
ed, operation is possible
again.
Switching off
Switches the room thermostat
off. Temperature control is
deactivated. The protective functions
(valve protection and antifreeze protec-
tion) remain active.
For the room thermostat Control, the
comfort programs from the Settings
menu are still applied. Queued switch-
ing signals are given out to connected
thermostats via the reduction output.
¾ Confirm the selection
by pressing.
9 All functions are deactivated.
9 The symbol
is displayed.
9 The target temperature is
displayed
Switching on
¾ Press the rotary control
for > 5 seconds.
9 The basic level is displayed.
9 All active functions are
displayed.
Back
Leaves the menu.
¾ Confirm the selection
by pressing.
9 The display is in basic level.
To Next Page
Loading...