I
UK
D
E
F
NL
P
S
DK
FIN
B
GR
CZ
EE
LV
LT
H
M
PL
SK
SLO
8
Operator's guide
1. Remove the lock pin using
a flat-headed screwdriver.
2. Remove the lock housing
3. Loosen the top panel. Do not
remove the screws,
just loosen them.
4. Tilt the top panel forwards
to remove it (it is secured in
tree places)
5. Lay the appliance on its back
and remove the upper hinge,
using the hex key.
6. Pull the torsion spring out of the
door together with the hinge.
7. Remove the bottom hinge
using the hex key.
8. Move the door handle to the
opposite side.
9. Move the hinge pin to the
opposite side of the bottom hinge.
10. Refit the bottom hinge on the
opposite side.
11. Move the palstic door guard
to the opposite side.
12. Insert the hinge pin and tosion
spring into the the top of the door on
the opposite side.
13. Fit the left-side top hinge
(available as extra).
Tighten the tosion spring
approx. 1/2 turn
(anticlockwise on left side,
clockwise on rigth.)
14. Secure the top hinge in
position.
15. Raise the appliance into
uppight possion. Click the top
panel into place (it is secured
in three places.)
To Next Page
Loading...