Ground Lift
Connects or disconnects the ground circuits between both XLR Outputs of the
SansAmp GED-2112 and a (grounded) mixer. We recommend starting with the ground
lifted. If necessary, connect the ground by pushing the switch in.
Tuner Output
As long as the unit is plugged in, the tuner output provides a constant, unaffected sig-
nal at all times, regardless of the position of the Level controls or the status of the
Mute switch on the front panel. This output can also be used as a buffered out to send
a transparent signal to other outboard gear.
7
Note: Geddy’s settings are based on a direct connection to a PA or recording set up and meant to
be monitored through a full range system (studio monitors, IEMs, etc.). Levels may vary. Limited
range systems, such as a bass amp, may require some adjustments. Be aware your instrument
type and playing style will have a pronounced effect on the final results. ©Copyright.
8
To Next Page
Loading...
