30 EN
Tested Area
Standard
Used for
tests
Temperature
Force
Transmitted
Level
Level 1 requirements:
average value ≤ 4.5kN; No
impact above 6kN
Level 2 requirements:
average value ≤ 2.5kN; No
impacts above 3kN
Central Back 1621-4:2013 20°
Average 0.9kN
Peak 1.24kN
Level 2
Protection Level
The following table summarize and explain the performance level reported on the product
marking as an inflatable impact protector:
Passive Back Protector
The Tech-Air® 5 System is equipped with a non-removable passive central back protector
that provides protection to the back area even if the System should not deploy. This back
protector is certified as a Personal Protective Equipment Category 2, Level 1, under the
Regulation EU 2016/425, according to the EN 1621-2:2014 standard.
The EU examination was conducted by:
- Notified Body #0598 SGS Fimko Oy, Takomotie 8, 00380, Helsinki, Finland
For this kind of certification, product markings are as follows:
Name of the
Manufacturer
Protector Size
(Waist to
Shoulder)
Product
Identification Code
Indicates that
the product has
been tested
according the
1621-2:2014
standard
Indicates that
the product is for
motorcycle use
Indicates that the
product meets
Central Back, Level
1 requirements
To Next Page
Loading...