29 EN
CLASS OF PROTECTION
TEST
PERFORMED
CLASS AAA
GARMENTS
EN 17092- 2:2020
CLASS AA
GARMENTS
EN 17092- 3:2020
CLASS A
GARMENTS
EN 17092- 4:2020
CLASS B
GARMENTS
EN 17092- 5:2020
CLASS C
OVERGARMENT
GARMENTS
EN 17092- 6:2020
CLASS C
UNDERGARMENT
GARMENTS
EN 17092- 6:2020
Impact
abrasion
resistance
120 km/h –
75 mph
70 km/h –
43 mph
45 km/h –
28 mph
45 km/h –
28 mph
45 km/h –
28 mph
Not
applicable
Tear
strength
50 N 40 N 35 N 35 N 35 N 10 N
Seam
strength
12 N/mm 8 N/mm 6 N/mm 6 N/mm 6 N/mm 4 N/mm
Inflatable Protector
As a motorcyclist’s inflatable protector, this is certified under the Regulation EU 2016/425,
according to the EN 1621-4:2013 standard, only in the applicable parts, Impact and
Ergonomic Requirements only.
The EU examination was conducted by:
- Notified Body #0598 SGS Fimko Oy, Takomotie 8, 00380, Helsinki, Finland
The explanation of the product markings are as follows:
Indicates that
an inflatable
protector is
installed
Product
Identification
Code
Name of the
Manufacturer
Indicates that
the product is
for motorcycle
use, meets
Central Back,
Level 2 airbag
requirements
Garment Size
(Waist to
Shoulder) Sizing.
See Table in
Section 6
EU 2016/425 CAT II
ABS520
AIRBAG MODULE
0080
AIRBAG
2
CB
0080.P1.15.0023
44 - 48 cm
To Next Page
Loading...