What to do if the tech air 5 system shows a solid red LED?
- KKenneth ThompsonJul 29, 2025
If the solid red LED (3c) is illuminated on the Tech Air Motorcycle Accessories LED Display (3), it indicates that the gas inflators are empty and/or the airbag must be replaced. After a deployment, the gas inflators must be replaced. The System will not work, and the LED Display (3) will show the red light until the gas inflators are replaced. If the number of left deployment is 0, the red LED (3c) will signal a System fault even after the gas inflators replacement. In this case, the airbag itself must be replaced and the System reactivated by the authorized dealer where the System was purchased. Alternatively, a solid red LED (3c) may indicate a system error. In this case, contact the authorized dealer where the System was purchased to check the System.