
Do you have a question about the Tech Craft FLEX52W and is the answer not in the manual?
| Brand | Tech Craft |
|---|---|
| Model | FLEX52W |
| Category | Indoor Furnishing |
| Language | English |
Emphasizes the importance of reading and following instructions to avoid serious injury or damage.
Specifies the unit is intended for flat screen TVs up to 52" and 150 lbs.
Alerts about small hardware parts that could be a choking hazard for small children.
Strongly recommends installation by a qualified contractor for options #1 and #3.
Details requirements for mounting on wooden studs or concrete walls for Option #3.
Lists steps to take before starting installation, including checking parts and tools.
Provides safety notes to follow during the installation process.
Lists necessary tools for assembly, including screwdrivers, hammer, and drill bits.
Details all included parts with their part numbers and quantities for assembly.
Step 1: Assembling the moulding and supports for Option 1.
Step 2: Assembling the rear post and swivel plate for Option 1.
Step 3: Installing the main plate assembly for Option 1.
Step 4: Installing the back panel and rear post for Option 1.
Step 5: Installing the anti-tipping kit for safety.
Step 6: Assembling the main mounting frame.
Step 7: Installing the mounting frame and top shelf.
Step 8: Installing the TV onto the assembled unit.
Step 1: Assembling moulding and supports for Options 2 & 3.
Step 2: Installing the back panel for Options 2 & 3.
Step 3: Installing the top glass shelf for Options 2 & 3.
Step 4: Installing the remaining glass shelves for Options 2 & 3.
Step 5: Assembling the mounting frame for Option 3 wall mount.
Step 6A: Installing the mounting frame onto a wooden frame wall.
Step 6B: Installing the mounting frame onto concrete or cinder block walls.
Step 7: Installing the TV onto the wall-mounted frame.
Loading...