AUX Connecon (3.5mm cable connecon)
If you do not wish to make a wireless Bluetooth conne con you can
also connect to your speaker through a AUX connecon. An 3.5mm
AUX Cable is supplied with the speaker.
To make this connecon connect one end of the 3.5mm audio cable
to your AUX output on your device and the other end to the rear AUX
input on your speaker.
Your speaker will automacally switch to AUX mod e when a cable is
inserted to the rear terminal of the speaker.
USB Output
The USB port on the rear of the TI52 speaker is intended for service
purposes. This
USB port DOES NOT SUPPORT MEDIA playback.
To Next Page
Loading...