TECH Yealink T29G - Advanced Call and Line Functions; Call Pick Up; Conference Call; Busy Lamp Field;DSS

Yealink T29G User Guide
Tech Electronics Help Desk Support: (314) 951-7711 pg. 4
ii. Enter the destination number you want to forward incoming calls to when the phone is busy in
the Forward to field.
iii. If you select No Answer Forward:
iv. Press or 0 , or the Switch soft key to select Enabled from the No Answer Forward field.
v. Enter the destination number you want to forward unanswered incoming calls to in the Forward
to field.
vi. Press or , or the Switch soft key to select the ring time to wait before forwarding from
the After Ring Time field. (Default ring time = 12 sec)
To disable call forward on the phone:
1. Press when the phone is idle.
OR
2. Press Menu>Features>Call Forward
a. Press or , to select the desired forwarding type and then press the Enter soft key.
b. Press or , or the Switch soft key to select Disabled to disable the call forward.
c. Press Save soft key.
Call Pick Up
To pick up a call ringing a specific phone that is not ringing on your phone.
1. Pick up the handset, press the speakerphone or press the line key and
then press the More soft key.
2. The DPickup soft key appears on the LCD screen.
3. Enter the phone number which is receiving an incoming call.
4. Press the DPickup soft key again. The call is answered on your phone.
Conference Call
A conference call of up to 3 parties is supported.
1. Place a call to the first party.
2. When the first party answers the call, press or the
Conference soft key to place a new call. The active call is placed
on hold.
3. Enter the number of the second party and press or the
Send soft key.
4. When the second party answers the call, press or the
Conference soft key again to join all parties in the conference.
Busy Lamp Field/DSS
You can press a BLF key to dial out the monitored phone number when the monitored line is idle. You can receive a visual
or/and an audio alert (if enabled), and also pick up calls that are received on the monitored lines.
1. Press Menu>Features>DSS Keys
2. Select the desired DSS key.
3. Press or , or the Switch soft key to select BLF from the Type field.
4. Press or , or the Switch soft key to select the desired line from the Account ID field.
5. Enter the phone number or extension you want to monitor in the Value field.
6. Press the Save soft key to accept the change or the Back soft key to cancel.