VERSA PATROL SERVICE MANUAL
4
3. Radio Information
4. Package Layout
4.1 Box Dimension
4.2 Box Layout
5. Parts of the Radio
6. Initial Assembly and Preparation
6.1 Charging
Before charging the battery, make sure that the transceiver has been turned OFF. To charge
the battery, plug in to AC outlet (110-240Vac) and insert the bottom of the battery into the
charger. Red LED light on the charger indicates that the battery is charging. Green LED light
indicates that the battery is fully charged. The battery reaches its maximum capacity after 2 to 3
charging cycles.
To Next Page
Loading...