04
Security Expert
for Your Home and Business
Tips:
All the PoE cameras in the packed kits have already been programmed into the NVR. So cameras
will auto connect to NVR after the NVR is powered on. You do not need to add it again.
then click “OK”.
And then click “Retry”, it will show all ok. And that means the NVR is connect to internet successfully.
3. Add an Additional PoE Camera to the NVR
3.1 When you need to add an additional PoE camera
Add a new additional PoE camera to your NVR system.
When a PoE camera lost connection with the NVR or reset to factory defaults. You need to
add it to the NVR again.
1
2
To Next Page
Loading...