05
Security Expert
for Your Home and Business
3.2 How to add an additional camera.
Use the Ethernet cable to connect the PoE Camera into the NVR camera ports or to the parts of
PoE switch that connect to the same router with the NVR.
Click ”+” on the channel that with no video and you want to add the camera in, then it will start
search the PoE cameras that connected in the same network. On the cameras list, the ones
already connected to the NVR will show in below list and showed“connected”, you can choose
the new additional one that not connected and just click “Quick set”, it will start add it into the
PoE NVR automatically. Click “OK” and then apply to finish it.
First check the cameras spots where you want to monitor and then decide where to put your
NVR. So that all the cameras are within the NVR’s access with the Ethernet cables in the kit. Or
you need additional Ethernet cables for extension if the cables in the kit can not make it.
After finding the best positions for cameras and NVR, you can start the wiring work for cameras
to NVR and NVR to the router.
4. Installation
4.1 Find the proper spots for cameras and position for NVR.
4.2 Wiring the cameras and NVR
To Next Page
Loading...