DC12V
AUDIO OUT
SUB
VGA
HD-port
WAN USB
MAIN
OFFON Power
Back of the NVR
Red indicator light: It will be on when the NVR is plugged in power adapter(DC 12V 2.5A).
Green indicator light: When the HDD is not connected to the NVR or the HDD is not
formatted, the light will be off;
When the NVR is recording, the light will flash slowly;
When the HDD is connected to the NVR but the NVR don't record, the light will be always on.
IR: To receive infrared remote control signal.
Audio Out: For a speaker to play the audio.
VGA Port: For viewing on VGA monitor.
HD Port: For viewing on HD monitor.
WAN Port: Connect your NVR to Internet.
USB Ports: For USB mouse and backup.
DC Power Port: For power adapter input 12V 2.5A, the size of the DC plug is 5.5*2.1mm.
Hard Disk Installation
Please install the hard disk first. If not, the video recorder can only monitor normally, but
cannot record or playback video.
02
To Next Page
Loading...
