7
Setup
The keypad operates under 4 modes.
Normal mode
The LED indicator blinks once every 5 seconds.
Sleep mode
Under Normal mode, the keypad switches to sleep mode if
no operation is made for 35 seconds. Press the Arm [ ] or
Home Mode [ ] keys to exit Sleep mode. When the keypad
is in sleep mode, the LED indicator is o.
RFID Reader mode
Under Normal mode, press [*] on the keypad to activate
the RFID reader for 10 seconds: the LED indicator turns
on. After 10 seconds, the LED light turns o as the
RFID reader turns o automatically.
Setup mode
To enter Setup mode, switch to Normal mode and then
enter [your admin code+#] on the keypad. The LED in-
dicator blinks once every second. Press [*] to exit the
Setup mode and switch to the Normal mode. After 30
seconds without operation, the keypad goes back to the
Normal mode.
Default admin code: 123456
Remark
Correct operation: 1 beep and the LED light blinks once.
Wrong operation: 2 beeps and LED light blinks twice.
To Next Page
Loading...