• Do not mix up the HDMI EXTENDER sender and HDMI EXTENDER
receiver, and the IR blaster and IR receiver.
• Do not plug-in/out the cables when it is in using.
INTRODUCTION
HDMI extender extends your HDMI video/audio with the resolution of
1080p 60Hz up to 120m (394 feet) via single network cable. Supports
IR signal transmission, to control media playback of the signal source
device at the display location.
INSTALLATION REQUIREMENTS
1. HDMI source device (computer graphics card, DVD, PS3, HD
monitoring equipment, etc..)
2. HDMI display device like SDTV, projector with HDMI port.
3. Network cables: UTP/STP Cat5e/6 networking cables, which
following the standard of EIA568B
Transmission length: CAT5 80m/CAT5E100m/CAT6 120m
PACKAGE CONTENTS
• HDMI EXTENDER sender TX x 1pc
• HDMI EXTENDER receiver RX x 1pc
• User manual x 1pc
• DC5V/1A x 2pcs
• IR Blaster extension cable x 1pc
• IR receiver extension cable x 1pc
Note: above accessories are contented in the regular package for the
kit with transmitter and receiver. If buy HDMI Extender TX or HDMI
Extender RX separately, the package contents would be different.
PANEL DESCRIPTION
HDMI EXTENDER TX (Sender)
7 8
EN - 3
WWW.TECHLY.COM
HDMI EXTENDER OVER IP
To Next Page
Loading...
