By battery reactivation port.
The battery reactivation port (1) is for rescue charging only, use this
charging method if other way of charging is not possible only!
Remove the protective cover with a screwdriver, plug the Type-C charging
cable (not included) into the charging port, and plug the charger (not
included) into the mains socket. It takes a long time to charge here (about
10-14 hours) until the LCD screen lights up.
Use of Product
The Products have different function units inside, each is equipped with a
switch to switch the relevant function on or off
Display:
To activate the Display, hold the switch for ~1 second, the Display lights
up and show the relevant status-information for further details go to the
point Display. It will automatically turn off if there is no operation for 5
minutes; you can press any button to wake up.
DC unit:
To activate the DC ports USB and 12V), hold the DC power switch for ~1
second, the switch will light up and show the DC unit is ready to use.
AC Unit.
To activate the AC ports, hold the AC power switch for ~1 second, the
switch will light up and show the AC unit is ready to use. We suggest to
switch the AC ports off as long as they are not used, the internal inverter
need battery power as well as no item is connected.
LED:
To activate the LED hold the LED switch for ~1 second, the LED will light
up, press the switch again to change the different functions.
Troubleshooting
Please check if the indicator light on the power adapter is on, if not, please check:
Is the adapter connected,
Whether the AC socket is normal, and whether the AC mains is normal; (Note:
To Next Page
Loading...
Need help?
General
