17
Playback controls
To pause playback, press the PLAY/PAUSE (▶‖) button once to
halt playing. Press it again to continue playback.
To play the previous track, press ◀◀ once or hold down
continuously to rapidly progress through previous tracks.
To play the next track, press ▶▶ once or hold down continuously to
rapidly advance through tracks.
To delete a file on your media storage device, while in playback
mode, press and hold the REC/DEL button until the “DEL” LED light
flashes along with “dL” on the display. Then press REC/ DEL again
and the “DEL” LED will flash rapidly and the file will be deleted.
To delete a file on your media storage device: While in STOP
mode, select the track by pressing ▶▶ or ◀◀, press and hold the
REC/DEL button until the “DEL” LED light flashes along with “dL” on
the display. Then press the REC/DEL again and the “DEL” LED will
flash rapidly and the file will be deleted.
To stop playback of the music track, press the ■/USB/SD button.
Recording onto a USB flash drive/SD Card
This equipment has the capacity to encode your traditional music
media (vinyl records, cassette tapes or CDs via AUX IN) into digital
format and record it onto a USB device or SD card as MP3 file(s).
Insert a storage device (USB or SD card) into the relevant slot.
Get your traditional music media ready for playback: Either place
a record on the turntable, insert a cassette tape into the cassette slot,
insert a CD into a CD player or connect a different recording medium
to the AUX IN socket.
Set the function switch to the appropriate function: PHONO, CD or
AUX.
NOTE: If you are recording via Cassette, make sure an AUX IN
cable is not connected to AUX socket.
Press the REC button to start recording. “rE” will appear on the
display screen and the “REC” LED will illuminate. A few seconds
later the “REC” LED will start flashing and recording will begin.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
