EasyManuals Logo

Technaxx TX-103 User Manual

Technaxx TX-103
23 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #21 background imageLoading...
Page #21 background image
21
Connecting to headphones
Adjust the volume to an appropriate level before you put on your
headphones.
Plug in your 3.5mm headphone jack to the headphone socket.
Connecting to an external amplifier
This feature enables you to play turntable music through amplifier
or external speakers. You will need an RCA cable to make this
connection (not included).
Plug one end of the Red and White RCA jacks into the LINE OUT
ports at the back of the unit and the other end into R (red) and L
(white) sockets at the back of the amplifier or external speakers.
Radio Mode
FM Antenna
While in FM mode, tune in to an FM station and extend the antenna
to find a position that provides the best reception. The antenna may
need to be repositioned if you move the unit to a new location.
Playing the Radio
Turn ON the unit and adjust the volume to an appropriate level.
Turn the Function knob to the RADIO position.
Extend the antenna to obtain the best reception.
Slide the band switch to FM or AM.
Turn the Tuning knob to your desired radio station.
If reception is poor: AM Broadcast: Rotate the unit to find the best
position for AM stations. FM Broadcast: Extend and move the FM
antenna until you receive the station clearly.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Technaxx TX-103 and is the answer not in the manual?

Technaxx TX-103 Specifications

General IconGeneral
TypeBelt-drive audio turntable
OperationSemi Automatic
Motor typeDC motor
Product colorBlack, Gold
Cartridge typeCeramic stereo cartridge
Volume controlRotary
Cassette playerYes
Turntable speeds33, 45, 78 RPM
Supported radio bandsAM, FM
Audio formats supportedMP3, WMA
Compatible memory cardsMicroSD (TransFlash), MicroSDHC, SD, SDHC
Signal-to-Noise Ratio (SNR)45 dB
USB version2.0
Bluetooth range8 m
Bluetooth version2.0+EDR
Bluetooth profilesA2DP, HFP
USB ports quantity1
Power supply typeAC
AC adapter frequency50 Hz
AC adapter output voltage230 V
Power consumption (typical)18 W
Impedance4 Ω
Frequency range60 - 16000 Hz
RMS rated power2.5 W
Number of speakers2
Weight and Dimensions IconWeight and Dimensions
Depth445 mm
Width335 mm
Height235 mm
Weight7000 g

Related product manuals