Technaxx TX-103 User Manual

19
Tape Mode
Cassette Tape hints
 Metal and Chrome (cobalt) tapes have identification holes.
 Use your finger or a pencil to turn the cassette tape’s hub and take
up any slack tape.
 Avoid touching the tape. Finger prints attract dust and dirt.
 Avoid dropping or subjecting cassettes to excessive shock or
force.
IMPORTANT when using the cassette deck:  Make sure to
insert the cassette in the correct direction.
 To avoid damaging the cassette, we strongly recommend taking it
out of the equipment after playing the cassette.
Playing a cassette
 Turn ON the unit and adjust the volume to an appropriate level.
 Turn the Function knob to Cassette/AUX and the display will show
“tP”
exposed side =
 Insert a pre-recorded tape into the cassette slot with the tape side
to the right. By pushing slightly, the tape will slide into place and
begin playing automatically.

Technaxx TX-103 Specifications

General

Type	Belt-drive audio turntable
Operation	Semi Automatic
Motor type	DC motor
Product color	Black, Gold
Cartridge type	Ceramic stereo cartridge
Volume control	Rotary
Cassette player	Yes
Turntable speeds	33, 45, 78 RPM
Supported radio bands	AM, FM
Audio formats supported	MP3, WMA
Compatible memory cards	MicroSD (TransFlash), MicroSDHC, SD, SDHC
Signal-to-Noise Ratio (SNR)	45 dB
USB version	2.0
Bluetooth range	8 m
Bluetooth version	2.0+EDR
Bluetooth profiles	A2DP, HFP
USB ports quantity	1
Power supply type	AC
AC adapter frequency	50 Hz
AC adapter output voltage	230 V
Power consumption (typical)	18 W
Impedance	4 Ω
Frequency range	60 - 16000 Hz
RMS rated power	2.5 W
Number of speakers	2

Weight and Dimensions

Depth	445 mm
Width	335 mm
Height	235 mm
Weight	7000 g