EasyManuals Logo

Technaxx TX-140 User Manual

Technaxx TX-140
31 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
Intended sites
The Car interior light is intended for installation in
Automobiles (and Lorries)
Caravans
Boats
with 12V batteries.
Do not place the Car interior light :
Near heat sources (radiators, direct sunlight), flammable materials, battery
compartment or starter battery.
Moist locations or locations exposed to dripping or splashing water,
In environments with explosion hazards
installation
The installation of the Car interior light TX-140 can be done under the amature
board, in the trunk or under the seats. Before you glue the LED Stripes make
sure that the cables can be laid cleanly and that no tripping hazards arise. The
driver and the passengers must not be hampered by the product at any time.
Clean the area before attaching the LED strips to ensure a secure connection.
The installation should be done so that neither the driver nor other road users
are dazzled or irritated by the lighting.
Warnings & Caution
ONLY INDOOR APPLICATION. These products do not have ECE approval, ie. h., they
may not be used on the vehicle in any outdoor application on public roads. Use on public
roads leads to the expiry of the operating license and loss of insurance coverage. In many
countries, the distribution and use of these products is prohibited. Please contact your local
distributor for availability information in your country. Use of the device in life support
applications where failure of the device can reasonably be expected to cause the failure of
the life support equipment or to significantly affect its safety or effectiveness is not
recommended. Do not use the device in the presence of a flammable anesthetic mixture
with air, oxygen or nitrous oxide, and also not near flammable materials, fumes or gases.
Do not operate near car heating vents or in direct sunlight. Keep the device dry at all
times and disconnect when not in use. Turn OFF connected equipment before (!) starting
your engine.
Hints for Environment Protection: Packages materials are raw
materials and can be recycled. Do not disposal old devices or
batteries into the domestic waste. Cleaning: Protect the device from
contamination and pollution (use a clean drapery). Avoid using rough,
coarse-grained materials or solvents/aggressive cleaner. Wipe the
cleaned device accurately. Distributor: Technaxx Deutschland
GmbH & Co.KG, Kruppstr. 105, 60388 Frankfurt a.M., Germany

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Technaxx TX-140 and is the answer not in the manual?

Technaxx TX-140 Specifications

General IconGeneral
Cable length1.4 m
Remotely operatedYes
Operating voltage12 V
Power source typeDC
Type-
Product colorBlack, White
Placement supportedIndoor
Suitable for light typeAmbience
Color changingNo
Colors quantity8
Number of bulbs48 bulb(s)
Weight and Dimensions IconWeight and Dimensions
Width15 mm
Length220 mm
Thickness5 mm

Related product manuals