11
Using the Rope (Elastic cord)
Use the Rope to mount the time-lapse camera to any object. Pull the rope through
the round holes on the back and put the rope around the desired object. Now make a
loop or knot to tighten the Rope.
Download Files to a computer (2 ways)
⚫ Inserting the MicroSD card into a card reader.
⚫ Connecting the camera to a computer using the supplied MicroUSB cable.
Using a Card Reader
→ Pop-out the memory card from the camera and insert it into a card reader adapter.
Then connect the card reader to a computer.
→→ Open [My Computer] or [Windows Explorer] and double-click the removable
disk icon that represents the memory card.
→→→ Copy image or video files from the memory card to your computer.
Connecting the camera to a PC by the MicroUSB Cable
→ Connect the camera to the computer via MicroUSB cable. Switch on the camera,
the screen will display „MSDC”.
→→ Open [My Computer] or [Windows Explorer]. A removable disk appears in the
drive list. Double-click the "Removable Disk" icon to view its contents. All files are
stored in the folder named „DCIM”.
→→→ Copy the photos or files to your computer.
NOTES on Cleaning
Before cleaning the device, disconnect it from the power supply (remove batteries)!
Only use a dry cloth to clean the exterior of the device. To avoid damaging the
electronics, do not use any cleaning fluid. Clean the eyepieces and/or lenses only
with a soft, lint-free cloth, (e.g.microfibre cloth). To avoid scratching the lenses, use
only gentle pressure with the cleaning cloth. Protect the device from dust and
moisture. Store it in a bag or box. Remove the batteries from the device if it is not
used for a longer time
To Next Page
Loading...
