8
LED: Set the Led [On]/[Off] (default). This can help to light up dark environment.
→ Select and press OK button (11) to confirm.
⚫ [ON] During the night, the LED will turn on automatically, to provide necessary light
for taking pictures/videos. This makes it possible to take pictures at a distance about
3–18m.
⚫ However, reflective objects such as traffic signs can cause overexposure if they
are located within the recording range. In night mode, the pictures just can display
white and black.
Exposure: Set the exposure. [+0.3 EV]/[+0.2 EV]/ [+0.1 EV] /[+0.0 EV] (default) /
[-1.0 EV]/[-2.0 EV]/[-3.0 EV].
→ Select and press OK button (11) to confirm.
Language: set the language display on screen: [English] / [German] / [Danish] /
[Finnish] / [Swedish] / [Spanish] / [French] / [Italian] / [Dutch] / [Portuguese].
→ Select and press OK button (11) to confirm.
Photo Resolution: Set the image resolution: the bigger the resolution → the higher
the sharpness! (It will take bigger storage either.)
[2MP: 1920x1080] (default) / [1M: 1280x720]
→ Select and press OK button (11) to confirm.
Video Resolution: [1920x1080] (default) / [1280x720]. → Select and press OK
button to confirm. Set the video resolution: the bigger the resolution → the shorter the
recording time.
→ Select and press OK button (11) to confirm.
Frequency: Set the light source frequency to match frequency of electricity supply in
local region to prevent interference. Options: [50Hz] (default) /[60Hz].
→ Select and press OK button (11) to confirm.
Video length: Set the duration of recording a video clip. Options: 3 sec. – 120 sec.
(default is 5 sec.)
→ Select and press OK button (11) to confirm.
Photo Stamp: stamp the date & time on the photos or not. Options: [Time & date]
(default) / [Date] / [Off].
→ Select and press OK button (11) to confirm.
To Next Page
Loading...
